SAIC MAXUS G10 kunye V80 Front Wiper Motor

Inkcazelo emfutshane:

Iimveliso Isicelo: SAIC MAXUS G10 / V80

Iimveliso OEM NO: C00017987

I-Org yeNdawo: YENZELWE ETSHAYINA

Uphawu: CSSOT / RMOEM / ORG / IKOPI

Ixesha lokukhokela: Isitokhwe, ukuba singaphantsi kwe-20 PCS, eqhelekileyo inyanga enye

Intlawulo: TT Idiphozithi

Uphawu lweNkampani: CSSOT

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ulwazi lweeMveliso

Iimveliso Igama	Injini yeWiper yangaphambili
Products Application	I-SAIC MAXUS G10 /V80/T60
Iimveliso OEM NO	C00017987 C00013569
I-Org yendawo	YENZIWE ETSHAYINA
Uphawu	CSSOT / RMOEM / ORG / IKOPI
Ixesha lokukhokhela	Stock, ukuba ngaphantsi 20 PCS, eqhelekileyo inyanga enye
Intlawulo	TT idiphozithi
Uphawu lweNkampani	CSSOT
Inkqubo yesicelo	Inkqubo yeChassis

MAXUS G10 Front Wiper Motor C00017987

Ulwazi lwemveliso

I-wiper motor iqhutywa yi-motor.Ngokusebenzisa isixhobo sokudibanisa intonga, intshukumo ejikelezayo yemoto iguqulwa ibe yintshukumo ephindaphindayo yengalo yosuli, ukuze kuqondwe isenzo sosule.Ngokubanzi, i-motor inokutshintshelwa ukwenza i-wiper isebenze.

I-windshield wiper yemoto iqhutywa yi-windshield wiper motor, kwaye i-potentiometer isetyenziselwa ukulawula isantya semoto yeegiya ezininzi.

Kwisiphelo esingasemva se-wiper motor kukho ukuhanjiswa kwegiya encinci evalelwe kwizindlu ezifanayo ukunciphisa isantya sokuphuma kwisantya esifunekayo.Esi sixhobo saziwa ngokuba yi-wiper drive Assembly.I-shaft ye-output yendibano idibaniswe kunye nesixhobo somatshini ekupheleni kwe-wiper, kwaye i-swing ebuyisela i-wiper ifunyenwe nge-fork drive kunye nokubuya kwentwasahlobo.

i-wiper motor ye-SAIC MAXUS V80 C0001

umgangatho womgangatho

I-wiper wiper kufuneka ihlangabezane nezi mfuno zilandelayo:susa amanzi kunye nekhephu;Susa ukungcola;Ingasebenza kubushushu obuphezulu (80 degrees celcius) kunye nobushushu obuphantsi (minus 30 degrees Celsius);I-Acid, i-alkali, ityuwa kunye nokumelana ne-ozone;Iimfuno zokuphindaphinda: kufuneka kubekho ngaphezu kweentlobo ezimbini zesantya, enye ingaphezulu kwamaxesha angama-45 / imvula, enye i-10 ~ 55 amaxesha / min.Kwaye umehluko phakathi kwesantya esiphezulu kunye nesantya esiphantsi kufuneka sibe ngaphezu kwamaxesha e-15 / min;Kufuneka ibe nomsebenzi wokumisa ngokuzenzekelayo;Ubomi benkonzo kufuneka bube ngaphezu kwemijikelo ye-1.5 yezigidi;Ixesha elifutshane lokujikeleza lingaphezulu kwe-15 min.